Danbridge resistor decade


Danbridge decade

This is a precision resistor decade from the Dannisch firm Danbridge. It has three decades. 1 Ohm in 0.1 Ohm steps, 10 Ohm in 1 Ohm steps and 100 Ohm in 10 Ohm steps. It is 0.1%. But it behaves better than that. I measured the biggest difference in the 100 Ohm position. That was only 0.04 Ohm ,.

The inside is made of low tempco wirewound resistors



This entry was posted in Calibration gear, Measurement gear. Bookmark the permalink.

Comments are closed.